In an age when technology is becoming an inseparable part of everyday life, roller shutters with Wi-Fi control are becoming the new standard of convenience and security.
More and more users are choosing motors that can connect to a Wi-Fi network, because this lets you control your shutters remotely — straight from a smartphone or tablet.
Let's look at how to set up and use such a system to get the most out of it.

How a Wi-Fi motor for roller shutters works

A Wi-Fi motor is an electric drive fitted with a built-in or external communication module that connects to your home Wi-Fi network.
Thanks to this, you can:

• raise or lower your shutters through a mobile app;

• set an opening/closing schedule;

• control the system even when you are away from home.

The system integrates with your smartphone through the dedicated Smart Life app recommended by the manufacturer.
Once synced, you gain full control over all your shutters — at any time and from anywhere.

Getting ready to set up

Before you start the setup, make sure that:

1. The motor is installed correctly and connected to the power supply.

2. The Wi-Fi network is stable, with a good signal where the shutters are installed.

3. You have access to the mobile app and a registered account — if you don't have one, create it.

In most cases the setup takes no more than 10 minutes — it is as simple and intuitive as possible.

Step-by-step guide to setting up a Wi-Fi motor

1. Switch on the motor and check that it works.
   Make sure the shutter responds to control from the remote — this confirms the connection is correct.

2. Launch the mobile app.

3. Put the motor into sync mode.
   Press the button on the motor three times.

4. Add the device in the app.
   Select the shutter you want in the app on your phone and tap it on the screen. Enter your Wi-Fi network password.
   Wait for the connection to finish — this usually takes up to 30 seconds.

5. Test the controls.
   Open and close the shutter from your smartphone, and check the response speed, the travel limits, and the signal strength.

6. Name the device and save the settings.
   For example: "Office shutter," "Kitchen shutter," or "Garage."

We have prepared a special video for you below, showing the setup process.

Advanced features of Wi-Fi motors for roller shutters

Once the basic setup is done, you can take advantage of additional features:

• Timers and scenes. The shutter opens automatically in the morning and closes in the evening.

• Integration with voice assistants. The system supports Google and Alexa.

• Remote control. You can check the status of your shutters even when you are outside the country.

How to order a motor like this for your shutters?

• Choose a standard solution in our parts catalog
• Pick a ready-made shutter using the roller shutter calculator
• Leave your contact details in the feedback form on the site
• By phone: (067) 631-38-23, (095) 549-60-62