Technical description of goods intended for management

roller shutters with AC 220V motors.

 

AC231-01 receiver + 2 mini remotes (Remote control, set AC231-01)

           

AC231-01 receiver + 2 mini remotes - external remote control radio receiver. Allows you to control one motor using a remote control (with the possibility of connecting up to 20 remote controls), as well as through the RS-232/485 port, or the control buttons on the stand itself. Suitable for controlling screen, projector lift, curtains, blinds with AC motors. Control: remote control/buttons on the body. Power supply 120-230 V alternating current. Frequency: 433.92 MHz. The maximum power of the connected drive is up to 500W.

Receiver AS408-02 (Group control AS408-02 (GU for separate control of 4 motors)

       

External remote control radio receiver with group controller. Allows you to connect and control four motors individually and as a group using a remote control, as well as via the RS485 port, control buttons on the receiver itself or a wired switch. Suitable for controlling screen, projector lift, curtains, blinds with AC motors. Control: remote control/buttons on the body. Power supply 120-230 V alternating current. Frequency: 433.92 MHz. The maximum power of the drives connected to 500W x4.

Receiver HS210+ 1 mini-control (Remote control, set M220)

The built-in remote control receiver is installed in a standard socket behind the wired switch and serves to control one motor, both from the remote control (with the possibility of connecting up to 40 remote controls, for 40 users) and from the wired switch. The receiver has a convenient connector for connection. Power supply 85-265 V alternating current. Frequency: 433.92 MHz. The maximum power of the connected drive is up to 800W.

Group controller AC405-01 (Group control AC405-01 (GU for simultaneous control of 4 motors))

                  

A simple group controller that connects to 4 motors for group control, using an external AC231-01 (433.92MHz) radio for remote control or a wired switch. Power supply 120-230V. The maximum power of the connected drives is 300W x4.

AC123-16 remote control panel (AC123-16 remote control panel)

 

Sixteen channel remote control AC123-16. Designed for remote control of roller shutter systems motors using receivers. Power supply 3V (CR2430). The frequency is 433.92 MHz.

AC key switch 16018-3A. (Lock switch)

Mechanical key three-position (down-off-up) rotary AC switch, connected by a cable to the tubular motor of the roller shutter system. Intended for switching electrical circuits, namely, control of motors of general-purpose protective roller shutter systems. Activated with a key. The body is made of aluminum alloy. Voltage 300V, 16A. Degree of protection IP54.

Microswitch S-5-2.

Electric alternating current switch for a tubular motor with a diameter of 45 mm. It works on breaking an electric circuit. Designed for voltage: 5A, 125V; 3A, 250V.

Microswitch G5T16.

Electric alternating current switch for a tubular motor with a diameter of 59 mm. It works on breaking an electric circuit. Designed for voltage: 16A, 125/250V.